Hasselblad H4D-60 Digital Back driver for Windows 7 - Hasselblad H4D-60 Digital Back driver from Hassel

Hasselblad H4D-60 Digital Back R361

Hasselblad H4D-60 Digital Back driver from Hasselblad for OS Independent

Hasselblad H4D-60 Digital Back driver from Hasselblad for OS Independent

Publisher review for Hasselblad H4D-60 Digital Back R361:

Before install Hasselblad H4D-60 Digital Back R361you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Hasselblad H4D-60 Digital Back . We recommend to always use most recent version of a driver.

This package contains firmware version R361.CIM for the H4D-60 sensor unit. Version R361 is a performance and stability release of version R354 and contains various improvements and fixes for the H4D-60 camera. Fixes:
- Flash sync support for use with manual shutters and technical cameras
- Support for Sandisk Extreme Pro 128GB CF card
- Improved initial hardware preview on back display as well as in Phocus
- Improved capture speed performance both tethered and untethered
- Stability improvements

Installation steps:
1. Unzip the downloaded file.
2. Make sure your camera is turned on.
3. Connect your complete camera, including the capture unit, lens and viewfinder to Phocus using a POWERED Firewire cable.
4. Go to "File" and then "Update Firmware" and locate the desired firmware package (.cim) on your computer, and click "Update".
5. Follow the instructions provided from the software carefully! Do not switch off the camera during the update process, unless specifically requested by the Phocus software.
6. When the update has been finalized, please restart your camera and check that the firmware has been successfully updated.
Important notice:- During the upgrade procedure do NOT disconnect the firewire cable until prompted!
- Unintentionally removing the Firewire cable during the firmware download procedure could in worst case render the camera useless which would require the need for authorized service.
- Manual updating of firmware is available in the Phocus software, from version 2.5.5 Mac and 2.5.5 Windows.

About Digital Camera Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. DOWNLOAD Hasselblad H4D-60 Digital Back Firmware R361 H4D-60 Digital Back FirmwareHasselblad H4D-60 Display FirmwareH4D-60 Display FirmwareH4D-60FirmwareDigital BackHasselblad
Operating system:
OS Independent